How to properly open your pool?

The joy of summer starts with a refreshing pool！

On a blazing hot afternoon, nothing feels better than diving into your own backyard pool. Crystal-clear water sparkles under the sun, children’s laughter echoes over the surface – as you swim freely, all the stress of the day melts away. Whether it’s a family gathering, a fun party with friends, or simply a peaceful moment floating alone in the breeze,your pool becomes one of summer’s most treasured memories.

But did you know? To enjoy a perfect “ready-to-swim” pool all season long, you can’t skip the proper opening steps! From equipment checks and water testing to balancing chemicals – every step matters for a safe and enjoyable swim experience.

In this article, we’ll walk you through: How to properly open your pool and enjoy a refreshing, worry-free summer!

🧰 I. Pre-Opening Equipment Inspection (Step-by-Step)

1. Check Pool Pump and Filter

• Насос для бассейна: Ensure the power connection is secure; check for rust or resistance in the motor. Gently rotate the fan blade to ensure smooth movement.
• Filter (Sand / Cartridge / DE):
  • Check if the tank is sealed properly;
  • Ensure the pressure gauge is functional;
  • Check if the multiport valve turns smoothly without sticking.

2. Inspect Plumbing and Valves

• Examine all PVC pipes for cracks, leaks, or aging;
• Make sure ball valves open and close freely;
• Reinstall any drain plugs removed for winterization (commonly found on the pump, filter, and heater).

3. Restore Chemical Feeders and Heaters

• If using a chlorinator или нагреватель для бассейна:
  • Check for stagnant water, foul smells, or blockage;
  • Reconnect inlet and outlet pipes;
  • Verify power supply and temperature settings.

---

🧼 II. Cleaning and Refilling the Pool (Step-by-Step)

1. Safely Remove the Крышка для бассейна

• Drain any standing water with a pump or siphon before removing the cover;
• Use a broom or pressure washer to clean off leaves and dirt;
• Let the cover dry fully in a shaded, ventilated area before folding and storing.

2. Clean the Pool Interior

• Используйте leaf skimmer to remove surface debris (leaves, insects, etc.);
• Scrub the walls and floor of the pool with a brush, focusing on corners and waterline stains;
• Используйте manual vacuum или робот-уборщик to remove settled dirt from the bottom.

3. Refill the Pool to Standard Water Level

• Refill the pool to mid-level of the skimmer or return inlet;
• Avoid overfilling to prevent chemical dilution;
• Используйте garden hose to add fresh water—preferably tested or filtered water if possible.

---

🧪 III. Water Testing and Chemical Balancing (Step-by-Step)

1. Test Pool Water

Use one of the following tools:

• Test Strips: Dip and match colors for a quick check;
• Liquid Test Kit: Drop-based and more accurate;
• Digital Water Tester: Highly precise, ideal for professional or frequent testing.

Recommended levels:

Parameter	Ideal Range	Notes
pH Level	7.2 – 7.6	Low pH causes corrosion; high pH weakens chlorine
Free Chlorine	1 – 3 ppm	Essential for disinfection
Total Alkalinity	80 – 120 ppm	Buffers pH fluctuations
Твердость кальция	200 – 400 ppm	Prevents scaling and corrosion
Cyanuric Acid (CYA)	30 – 50 ppm	Stabilizes chlorine under sunlight

2. Add Chemicals as Needed

• Регулировка pH: Use pH Increaser (Sodium Carbonate) or Decreaser (Sodium Bisulfate);
• Щелочность: Add Baking Soda or pH reducer as necessary;
• Chlorine: Add chlorine tablets or liquid bleach to meet target levels;
• Шоковая терапия:
  • Use fast-dissolving chlorine shock or non-chlorine shock;
  • Follow dosage instructions and spread evenly across pool;
  • Run pump for 8+ hours; do not swim during this period.

---

🔄 IV. Start Up the Filtration and Circulation System

1. Prime and Start the Pump

• Ensure the pump housing is filled with water;
• Open all air relief valves to remove trapped air;
• Power on the system and observe for steady water flow;
• Check for leaks or unusual noises.

2. Filter System Check

• Песчаный фильтр: Perform a backwash и rinse before use;
• Cartridge Filter: Rinse cartridges with a hose or replace if worn;
• DE Filter: Recharge with fresh diatomaceous earth powder after cleaning.

---

⚠️ V. Safety Tips and Operational Advice

Safety Precautions

• Always dry hands before handling electrical controls;
• Wear gloves and mask when handling pool chemicals;
• Ensure outlets and electrical components are GFCI protected.

Useful Tips

• Run the pool system continuously for 24 hours after startup;
• Schedule daily circulation of 8–12 hours for optimal water clarity;
• Используйте clarifiers if water appears cloudy before vacuuming;
• If algae appear, add algaecide to eliminate growth.

---

✅ Ongoing Weekly Maintenance Recommendations

Frequency	Task	Description
1–2x/week	Water Testing	Test pH, chlorine, and alkalinity
Weekly	Add Maintenance Chemicals	Chlorine tabs, stabilizers, etc.
Weekly	Skimming & Vacuuming	Remove debris, clean floor and walls
Monthly	Шоковая терапия	Deep clean with chlorine shock